MG-5 Perunggu Padat Menjadi Semak
MG-5 Perunggu Padat Menjadi Semak
Marginal Bearing mg-5 perunggu padat berubah menjadi semak produsen khusus bantalan & bushing yang dapat melumasi sendiri, Marginal Bearing yang didirikan pada tahun 2010, mengabdikan diri untuk mengembangkan dan memproduksi bahan bantalan yang dapat melumasi sendiri yang baru.
◆ Introduction
Machined cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.
◆ Lubricated groove
◆ Technical Data
| Technical Data | ||||||
| MG-5 | MG-5S1 | MG-5S2 | MG-5S3 | MG-5S4 | MG-5S5 | |
| Material designation | CuZn25Al6Mn4Fe3 | CuSn5Pb5Zn5 | CuAl10Ni5Fe5 | CuSn12 | CuSn10Pb10 | CuZn25Al6Mn4Fe3 |
| Density | 8 | 8.9 | 7.8 | 8.9 | 8.9 | 8 |
| Yield Strength N/mm2 | ＞450 | ＞90 | ＞260 | ＞150 | ＞100 | ＞450 |
| Tensile Strength N/mm2 | ＞750 | ＞200 | ＞600 | ＞260 | ＞210 | ＞800 |
| Elongation % | ＞12 | ＞15 | ＞10 | ＞8 | ＞8 | ＞8 |
| Hardness HB | ＞210 | ＞70 | ＞150 | ＞95 | ＞75 | ＞250 |
◆ Standard Size：
Cylindrical Bearing , Flange Bearing, Thrust washer , Plate.
Non-Standard Size：
Cylindrical Bearing , Flange Bearing, Thrust washer , Plate.
maaf, belum ada info sekarang!
Machined cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.
